Snakeoil Firmware - 1.1.8 (Blind Testing Update 8)
#11
Hi,

I just got around to doing the latest fw patch and it errors out;

----
SHA1SUM: 


*** ERROR *** Uploaded file missing, upload aborted?
*** ERROR *** Uploaded file missing, upload aborted?

-----
Nothing at all shows in the console. I looked at the files in /var/log that were modified and the only thing that I could find was in kern.log with the following 2 lines of errors;

Dec 11 23:27:59 NUC kernel: r8169 0000:03:00.0: Direct firmware load for rtl_nic/rtl8168g-2.fw failed with error -2
Dec 11 23:27:59 NUC kernel: r8169 0000:03:00.0 eth0: unable to load firmware patch rtl_nic/rtl8168g-2.fw (-2)

I am using the x86_64.fw file. For kicks I tried the i686 file but got the same result.

Any suggestions ?

[Edit] Since the last fw release, I also ran the update to bring the system up to Ubuntu 18.04.3 LTS. Not sure if that is relevant....
Reply

#12
(11-Dec-2019, 08:38 PM)davem Wrote: Hi,

I just got around to doing the latest fw patch and it errors out;

----
SHA1SUM: 


*** ERROR *** Uploaded file missing, upload aborted?
*** ERROR *** Uploaded file missing, upload aborted?
I'm guessing the php upload limit was restored to the default miniscule size. You can either modify the php.ini files directly (modify both cgi and cli), aor you can try the sideload method which will also work.

(11-Dec-2019, 08:38 PM)davem Wrote: Nothing at all shows in the console. I looked at the files in /var/log that were modified and the only thing that I could find was in kern.log with the following 2 lines of errors;

Dec 11 23:27:59 NUC kernel: r8169 0000:03:00.0: Direct firmware load for rtl_nic/rtl8168g-2.fw failed with error -2
Dec 11 23:27:59 NUC kernel: r8169 0000:03:00.0 eth0: unable to load firmware patch rtl_nic/rtl8168g-2.fw (-2)
Hmm. Although un-related, seems your card needs a fix... Can you SSH into your system, and run
Code:
sudo apt install linux-firmware
Then reboot the computer. These two messages should go away.

(11-Dec-2019, 08:38 PM)davem Wrote: [Edit] Since the last fw release, I also ran the update to bring the system up to Ubuntu 18.04.3 LTS. Not sure if that is relevant....
Yes it should be this. Did you do this from the WebApp or from the SSH console? I'm having successes and failures whenever I tried this from the WebApp, and still working out why it'll suceeed, or fail (AFAICT, it's completely random!).
Snakeoil Operating System - Music, your way!
Reply

#13
(12-Dec-2019, 08:25 AM)agent_kith Wrote:
(11-Dec-2019, 08:38 PM)davem Wrote:  
Hmm. Although un-related, seems your card needs a fix... Can you SSH into your system, and run
Code:
sudo apt install linux-firmware
Then reboot the computer. These two messages should go away.
(11-Dec-2019, 08:38 PM)davem Wrote: [Edit] Since the last fw release, I also ran the update to bring the system up to Ubuntu 18.04.3 LTS. Not sure if that is relevant....
Yes it should be this. Did you do this from the WebApp or from the SSH console? I'm having successes and failures whenever I tried this from the WebApp, and still working out why it'll suceeed, or fail (AFAICT, it's completely random!).

Thanks AK,

I ran that command but got some errors. I rebooted anyway and the messages disappeared from startup so I guess that it still worked.

I did the upgrade via SSH that I saw in a post in one of the threads...
Reply

#14
Not RespondingREST server is not responding. Reboot computer manually if GUI is not back after 5 reconnect attempts
Reply

#15
(15-Dec-2019, 05:12 AM)luiswu Wrote: Not RespondingREST server is not responding. Reboot computer manually if GUI is not back after 5 reconnect attempts
Hmm. Not working after a reboot? Did you enable file sharing or SSH? If yes, can side load the firmware by doing this: https://www.snakeoil-os.net/wiki/Advance...l-firmware

The above usually fixes all the problems.
Snakeoil Operating System - Music, your way!
Reply

#16
Anyone else having trouble with upnp?

I tried a fresh install (twice) and updated straight to 1.1.8, installed upmpdcli, and it shows up on Bubbleupnp but doesn't allow it to play. I then did another install and updated to 1.1.7 and all worked fine. Then, updated to 1.1.8 and no dice. Went back to 1.1.7 and it worked again.

Weird because the install looked fine and UpMpd shows up in Bubbleupnp but when I select a song it doesn't play. It doesn't even "process" the song, just a blank screen.

Not sure if anyone else tried this?
This is on a Rpi3b+ BTW.
Reply

#17
(15-Dec-2019, 10:50 PM)mkysimes Wrote: Anyone else having trouble with upnp?

I tried a fresh install (twice) and updated straight to 1.1.8, installed upmpdcli, and it shows up on Bubbleupnp but doesn't allow it to play. I then did another install and updated to 1.1.7 and all worked fine. Then, updated to 1.1.8 and no dice. Went back to 1.1.7 and it worked again.

Weird because the install looked fine and UpMpd shows up in Bubbleupnp but when I select a song it doesn't play. It doesn't even "process" the song, just a blank screen.

Not sure if anyone else tried this?
This is on a Rpi3b+ BTW.
I am on 1.1.7, using UPnP on Intel NUC and controlling with BubbleUPnP on tablet.  Not using upmpdcli.  I am reluctant to upgrade because I do not have the time at the moment to troubleshoot and re-install.
Reply

#18
(15-Dec-2019, 10:08 AM)agent_kith Wrote:
(15-Dec-2019, 05:12 AM)luiswu Wrote: Not RespondingREST server is not responding. Reboot computer manually if GUI is not back after 5 reconnect attempts
Hmm. Not working after a reboot? Did you enable file sharing or SSH? If yes, can side load the firmware by doing this: https://www.snakeoil-os.net/wiki/Advance...l-firmware

The above usually fixes all the problems.

wooo hoo. Now running 1.1.8 !

thanks !
Reply

#19
Yes, I have everything activated, my problem was to activate exfat, which I did through the console.
In the console it does recognize me, but in the program it still does not recognize the USB hard drive formatted in exfat.
I have tried to format it on both mac and windows, I have changed ports, I have changed it from USB 2.0 to 3.0 and nothing ...
Reply

#20
I'm away at the moment, with little to no Internet access at the moment. Sorry for the late reply.

With UPNP, is the audio device set up? Try to set up MPD 21.6 first. Make sure MPD loads, then change the player to bubble and upmdcli. That should fix it.
This will be fixed in the next update (hopefully).

As for exfat, did the web app return any error messages?
Snakeoil Operating System - Music, your way!
Reply



Bookmarks

Possibly Related Threads…
Thread Author Replies Views Last Post
  Snakeoil Firmware - 1.2.6 (Gear Isolation U6) agent_kith 26 3,865 08-Sep-2023, 01:15 PM
Last Post: hkphantomgtr
  Snakeoil Firmware - 1.2.13 (Gear Isolation U13) agent_kith 4 2,178 06-Sep-2023, 07:59 AM
Last Post: agent_kith
  Snakeoil Firmware - 1.2.12 (Gear Isolation U12) agent_kith 0 658 11-Jun-2023, 04:17 PM
Last Post: agent_kith
  Snakeoil Firmware - 1.2.11 (Gear Isolation U11) agent_kith 39 6,106 29-May-2023, 11:10 PM
Last Post: pikachullk
  Snakeoil Firmware - 1.2.10 (Gear Isolation U10) agent_kith 18 3,383 14-Feb-2023, 01:55 AM
Last Post: uglymusic



Users browsing this thread:
1 Guest(s)

[-]
Our Sponsors

[-]
Welcome
You have to register before you can post on our site.

Username/Email:


Password:





[-]
Latest Threads
ZimaBoard 2x NIC, 2x SATA, 2x USB, 1x PC...
Last Post: agent_kith
26-Mar-2024 12:04 PM
» Replies: 13
» Views: 612
LMS Upgrade ?
Last Post: uglymusic
15-Mar-2024 09:14 PM
» Replies: 7
» Views: 149
Squeezebox shutdown
Last Post: TripleX
13-Mar-2024 07:34 AM
» Replies: 4
» Views: 71
MP3 Not Playing
Last Post: Coacharnold
10-Mar-2024 10:25 AM
» Replies: 3
» Views: 52
Fail to install myMPD
Last Post: hkphantomgtr
03-Mar-2024 08:45 PM
» Replies: 9
» Views: 195
Intel HFI Driver Can "Save Tons Of CPU C...
Last Post: hkphantomgtr
28-Feb-2024 09:15 PM
» Replies: 0
» Views: 41
Announcing Snakeoil Measurements 1.3.0
Last Post: agent_kith
26-Feb-2024 10:02 PM
» Replies: 94
» Views: 4137
More Problems with Squeezelite in 1.3
Last Post: Coacharnold
17-Feb-2024 09:47 PM
» Replies: 2
» Views: 69
Snakeoil Music server & Snakeoil its own...
Last Post: Snoopy8
17-Feb-2024 11:20 AM
» Replies: 8
» Views: 365
RoonBridge (64 bit only)
Last Post: scrarfussi
15-Feb-2024 08:26 PM
» Replies: 3
» Views: 4125

[-]
SnakeoilOS Mission Statement

Our mission is to create a free to use computer OS that is easy to install, intuitive to operate and play music that will connect and engage with you emotionally.

SnakeoilOS gives you the freedom to spend more time on listening, enjoying and exploring music. Wasting time on computers is now a thing of the past! Everything is constantly evolving/improving. Please check back often for updates.

If you like this project, do show your support with a small token donation. All donations collected will be used to run this website, and for purchasing new equipment for the project.


Powered By MyBB, © 2002-2024. Theme © Melroy van den Berg.