Snakeoil Firmware - 1.2.8 (Gear Isolation U8)

[[email protected]]

do you mean installer ?

[agent_kith]

do you mean installer ?

Yes. Firmware updates will only update MPD, Squeezelite and the Snakeoil WebApp in general, it will not update LMS.

Installer will install LMS, but only if none was previously installed.

Alternatively, you can just download LMS (deb) file from the official website, and drop it into the install window. That'll work also. This might be the best option.

[[email protected]]

Yes. Logitechmedia version 8.3 cannot install
     logitechmediaserver_8.3.0~1666760196_amd64.deb  https://downloads.slimdevices.com/nightly/?ver=8.3
no problem back install version 7.9.4 so which last version 8.1. or 8.2 can install ?Tidal only work over 8.0 version
Do you now?

ps. How too change my nick form email cannot edit ?
thanks

[agent_kith]

Yes. Logitechmedia version 8.3 cannot install
     logitechmediaserver_8.3.0~1666760196_amd64.deb  https://downloads.slimdevices.com/nightly/?ver=8.3

What's the error with 8.3.x?

no problem back install version 7.9.4 so which last version 8.1. or 8.2 can install ?Tidal only work over 8.0 version
Do you now?

Installer is 8.2, so that should work. Please start a new thread and include the install log if you have problems, should be easy to address.

ps. How too change my nick form email cannot edit ?
thanks

You should be able to go to your profile (picture at the top right), and then click "change user name". Enter your current password, and you should be able to change your forum handle to another name.

[hossamyazeed]

I can not install Roon Bridge. Do I  something wrong? I made a complete new installation to 1.2.8
 

---

Hit:1 http://nl.archive.ubuntu.com/ubuntu jammy InRelease
Get:2 http://nl.archive.ubuntu.com/ubuntu jammy-updates InRelease [114 kB]
Hit:3 https://ppa.launchpadcontent.net/jean-fr...pp1/ubuntu jammy InRelease
Get:4 http://nl.archive.ubuntu.com/ubuntu jammy-backports InRelease [99.8 kB]
Get:5 http://nl.archive.ubuntu.com/ubuntu jammy-security InRelease [110 kB]
Get:6 http://nl.archive.ubuntu.com/ubuntu jammy-updates/main amd64 Packages [755 kB]
Get:7 http://nl.archive.ubuntu.com/ubuntu jammy-updates/restricted amd64 Packages [484 kB]
Get:8 http://nl.archive.ubuntu.com/ubuntu jammy-updates/universe amd64 Packages [761 kB]
Get:9 http://nl.archive.ubuntu.com/ubuntu jammy-updates/multiverse amd64 Packages [7,328 B]
Get:10 http://nl.archive.ubuntu.com/ubuntu jammy-security/restricted amd64 c-n-f Metadata [532 B]
Get:11 http://nl.archive.ubuntu.com/ubuntu jammy-security/multiverse amd64 c-n-f Metadata [228 B]
Fetched 2,332 kB in 1s (3,308 kB/s)
Reading package lists...
Changing software configuration...
*** Name: RoonBridge Mode: Installing ***
/usr/local/bin/curl
--2022-12-03 13:25:57--  http://download.roonlabs.com/builds/roon...inuxx64.sh
Resolving download.roonlabs.com (download.roonlabs.com)... 167.172.230.239
Connecting to download.roonlabs.com (download.roonlabs.com)|167.172.230.239|:80... connected.
HTTP request sent, awaiting response... 301 Moved Permanently
Location: http://download.roonlabs.net/builds/roon...inuxx64.sh [following]
--2022-12-03 13:25:58--  http://download.roonlabs.net/builds/roon...inuxx64.sh
Resolving download.roonlabs.net (download.roonlabs.net)... 104.22.14.70, 104.22.15.70, 172.67.14.113, ...
Connecting to download.roonlabs.net (download.roonlabs.net)|104.22.14.70|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 16676 (16K) [application/octet-stream]
Saving to: ‘/var/tmp/roonbridge-installer-linuxx64.sh’

     0K .......... ......                                     100% 26.6M=0.001s

2022-12-03 13:25:58 (26.6 MB/s) - ‘/var/tmp/roonbridge-installer-linuxx64.sh’ saved [16676/16676]


--------------------------------------------------------------------------------------

Welcome to the RoonBridge installer

This installer sets up RoonBridge to run on linux with the following settings:

 - RoonBridge will be installed in /opt/RoonBridge
 - RoonBridge's data will be stored in /var/roon/RoonBridge
 - RoonBridge will be configured to run as a system service
 - RoonBridge will run as root

These settings are suitable for turning a dedicated or semi-dedicated device
into an appliance that runs RoonBridge

If you want customize how RoonBridge is installed, see:

   http://kb.roonlabs.com/LinuxInstall

--------------------------------------------------------------------------------------


Downloading RoonBridge_linuxx64.tar.bz2 to /tmp/tmp.Scz2xaYQxQ/RoonBridge_linuxx64.tar.bz2

/var/tmp/roonbridge-installer-linuxx64.sh: line 157: 65013 Segmentation fault      (core dumped) curl -L -# -o "$TMPDIR/$PACKAGE_FILE" "$PACKAGE_URL"

--------------------------------------------------------------------------------------

The RoonBridge installer did not complete successfully.

If you are not sure how to proceed, please check out:

 - Roon Labs Community            https://community.roonlabs.com/c/support
 - Roon Labs Knowledge Base       https://kb.roonlabs.com/LinuxInstall

--------------------------------------------------------------------------------------

Failed to stop roonbridge.service: Unit roonbridge.service not loaded.
Failed to disable unit: Unit file roonbridge.service does not exist.

Install finished with errors, please review the above output for reasons.
 

---

hello ,
i had same issue yesterday when i was trying to install roon bridge , to solve this problem i had to use ubuntu-20.04.2-live-server-amd64 instead of ubuntu-22.04.1-live-server-amd64 . i did all the audio software installations exept hqplayer embedded . then i upgraded to ubuntu 22.04 to install Hqplayer. 
roon bridge is working fine after the upgrade.

[kees1000]

Thx hossamyazeed! Everything works now.
What I wonder is: what is the best Ubuntu version for Snakeoil-os? Ubuntu studio or Ubuntu server

[patch]

Hello

New user here. I managed to install snake oil os on raspberry pi 4b on top of raspbian. I am not able to find how to update the firmware. Could someone list some pointers how to go about it.

Regards

[agent_kith]

Hello

New user here. I managed to install snake oil os on raspberry pi 4b on top of raspbian. I am not able to find how to update the firmware. Could someone list some pointers how to go about it.

Regards

Welcome to the Snakeoil community patch!
Here's a wiki paragraph on how to do an upgrade: https://www.snakeoil-os.net/wiki/Configu...ll/Upgrade

If you go to the top of this forum section here (https://www.snakeoil-os.net/forums/Forum...-Firmwares), there is a YouTube video on how to do the upgrade. The video is of an earlier version, but the process is still the same.

[Snoopy8]

What I wonder is: what is the best Ubuntu version for Snakeoil-os? Ubuntu studio or Ubuntu server

@hkphantomgtr is the person who has tested Studio.

[hkphantomgtr]

What I wonder is: what is the best Ubuntu version for Snakeoil-os? Ubuntu studio or Ubuntu server

@hkphantomgtr is the person who has tested Studio.

Thanks for your credit, Snoopy8.  Yet I didn't compare between Studio and Server version, as I don't know how to replace the kernel with command line.