Snakeoil Forums

Full Version: Native DSD for DAC TAGA Harmony DA-300 V.3
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
Pages: 1 2 3
hi, i have the DAC TAGA Harmony DA-300 V.3
STD S24_3LE  (352800/1)
Can read DSD native, but I do not know how to configure it.
I have tried some configurations, but it does not sound in DSD mode, yes in the rest of the files.
Help!!
Thanks
(10-Jul-2019, 11:15 PM)luiswu Wrote: [ -> ]hi, i have the DAC TAGA Harmony DA-300 V.3
STD S24_3LE  (352800/1)
Can read DSD native, but I do not know how to configure it.
I have tried some configurations, but it does not sound in DSD mode, yes in the rest of the files.
Help!!
Thanks

You can configure native DSD mode if you have an activated edition of Snakeoil. If you are using the free edition, please generate a diagnostic file and send it over to me, I'll have a look and try and enable native DSD support via the kernel. Because of the back and forth, the kernel method will require a few tries to get it right..
Hi, i have an activated edition of Snakeoil.
I changed the kernel to vmlinuz-4.4.9-rt17-amd64-dsd-20190415.tar and tried it in dsd u32_le, and it does not play DSD, the other files play them perfectly
(12-Jul-2019, 02:48 AM)luiswu Wrote: [ -> ]Hi, i have an activated edition of Snakeoil.
I changed the kernel to vmlinuz-4.4.9-rt17-amd64-dsd-20190415.tar and tried it in dsd u32_le, and it does not play DSD, the other files play them perfectly

Are you using native mode or dop mode?
(12-Jul-2019, 07:04 AM)hkphantomgtr Wrote: [ -> ]
(12-Jul-2019, 02:48 AM)luiswu Wrote: [ -> ]Hi, i have an activated edition of Snakeoil.
I changed the kernel to vmlinuz-4.4.9-rt17-amd64-dsd-20190415.tar and tried it in dsd u32_le, and it does not play DSD, the other files play them perfectly

Are you using native mode or dop mode?

I'm using in native mode.
(12-Jul-2019, 08:58 PM)luiswu Wrote: [ -> ]
(12-Jul-2019, 07:04 AM)hkphantomgtr Wrote: [ -> ]
(12-Jul-2019, 02:48 AM)luiswu Wrote: [ -> ]Hi, i have an activated edition of Snakeoil.
I changed the kernel to vmlinuz-4.4.9-rt17-amd64-dsd-20190415.tar and tried it in dsd u32_le, and it does not play DSD, the other files play them perfectly

Are you using native mode or dop mode?

I'm using in native mode.

IC.  Did you check this?  https://www.snakeoil-os.net/Manual/advan...sd-support
hello, I have already managed to recognize the DAc but it reproduces in PCM not in DSD.
The sample rate as seen in the photo is STD S16_LE (44100/1)
What can I do to reproduce in DSD?
Thanks
[Image: 2019-07-20-13-17-58.jpg]
[Image: 2019-07-30-19-27-05.jpg]
Not sure why I missed this thread. As hkphantomgtr said, go to this thread, next scroll down and follow the steps in "What if your Native DAC Is Not In The List".

The specs listed is not immediately obvious if this DAC works with native DSD or not, but try native regardless (just make sure you keep the volume low during the test). And if all else fails, just fallback to DoP.
Hi, the DAC works perfect in DSD native in Foobar2000 whit the drivers ASIO.
It is possible to implement these drivers in Sankeoil?
Pages: 1 2 3