Hi there

New user trying to install Snake Oil OS.  Forgive me if this covered elsewhere (I did search).

Getting "Kernel Panic - not syncing: Attempted to kill init! exitcode=0x0000000b"

Steps taken:

- Using latest SnakeOil ISO i686-1.1.iso.
- Loaded on 8gb flash drive with Rufus.
- Ensure SATA AHCI mode is enabled (it was).
- Using i7 HP Pavilion, boot to menu, choose SnakeOil GUI (also did SnakeOil Ram option).
- Ends in Kernal Panic error as stated.  Machine locks up.

Any ideas?

Am trying to create SSD with SnakeOil OS on it using the i7 machine for configuring etc.  Once done I will transfer SSD over to headless ITX machine (currently used as Roon End Point using RAAT on Windows 10 Pro).  Aim is to establish if SQ better using SnakeOil OS as compared to Windows 10.

Overall config:  Roon Core (on Windows 10 server) > ethernet > Mini ITX (Windows 10 with Roon RAAT) > USB > Metrum DAC > LDR Pre > Radford Valve > Tannoy Berkeley. 

Cheers
Edward

London, UK

Could this work with Sankeoil?

https://www.ebay.es/itm/NEW-X96-Android-...0005.m1851

after updated to U7, when I shutdown the PC, it takes longer than before, it stay on the below screen for ~5 mins, then off. is it normal? when using U6, the shutdown takes only few second.

when I change the IP setting to static IP, during boot, the system will wait for 5 mins at this task:
A start job is running for Raise network interfaces (Xs / 5min)

but after 5mins, everything back to normal and the system is using the static IP.

I am using U6

Blind Testing U7 introduces RAM play for activated users.

My initial impressions with RAM play (this is in comparison to loading off files off my NAS) - there's not a lot of difference..

When playing off RAM, I seem to think

1. More depth
   
2. Perhaps a bit more pin point precision
   
3. More clarity
   
4. more speed?
   
5. Not very warm.