Help  Search  Portal
 Portal  Search
Hello There, Guest!  Register  Login

Native DSD for DAC TAGA Harmony DA-300 V.3


Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
 
#1
hi, i have the DAC TAGA Harmony DA-300 V.3
STD S24_3LE  (352800/1)
Can read DSD native, but I do not know how to configure it.
I have tried some configurations, but it does not sound in DSD mode, yes in the rest of the files.
Help!!
Thanks
 Reply
#2
(10-Jul-2019, 11:15 PM) luiswu Wrote: hi, i have the DAC TAGA Harmony DA-300 V.3
STD S24_3LE  (352800/1)
Can read DSD native, but I do not know how to configure it.
I have tried some configurations, but it does not sound in DSD mode, yes in the rest of the files.
Help!!
Thanks


You can configure native DSD mode if you have an activated edition of Snakeoil. If you are using the free edition, please generate a diagnostic file and send it over to me, I'll have a look and try and enable native DSD support via the kernel. Because of the back and forth, the kernel method will require a few tries to get it right..
Snakeoil Operating System - Music, your way!
 Reply
#3
Hi, i have an activated edition of Snakeoil.
I changed the kernel to vmlinuz-4.4.9-rt17-amd64-dsd-20190415.tar and tried it in dsd u32_le, and it does not play DSD, the other files play them perfectly
 Reply
#4
(12-Jul-2019, 02:48 AM) luiswu Wrote: Hi, i have an activated edition of Snakeoil.
I changed the kernel to vmlinuz-4.4.9-rt17-amd64-dsd-20190415.tar and tried it in dsd u32_le, and it does not play DSD, the other files play them perfectly


Are you using native mode or dop mode?
Synology w/ LPS > Snake-oil OS in fanless i7 >  Rockna Wavedream DAC > 田雨TA801 MKII > Nord One SE UP NC500DM Stereo > Volent VL3
 Reply
#5
(12-Jul-2019, 07:04 AM) hkphantomgtr Wrote:
(12-Jul-2019, 02:48 AM) luiswu Wrote: Hi, i have an activated edition of Snakeoil.
I changed the kernel to vmlinuz-4.4.9-rt17-amd64-dsd-20190415.tar and tried it in dsd u32_le, and it does not play DSD, the other files play them perfectly


Are you using native mode or dop mode?


I'm using in native mode.
 Reply
#6
(12-Jul-2019, 08:58 PM) luiswu Wrote:
(12-Jul-2019, 07:04 AM) hkphantomgtr Wrote:
(12-Jul-2019, 02:48 AM) luiswu Wrote: Hi, i have an activated edition of Snakeoil.
I changed the kernel to vmlinuz-4.4.9-rt17-amd64-dsd-20190415.tar and tried it in dsd u32_le, and it does not play DSD, the other files play them perfectly


Are you using native mode or dop mode?


I'm using in native mode.


IC.  Did you check this?  https://www.snakeoil-os.net/Manual/advan...sd-support
Synology w/ LPS > Snake-oil OS in fanless i7 >  Rockna Wavedream DAC > 田雨TA801 MKII > Nord One SE UP NC500DM Stereo > Volent VL3
 Reply
#7
hello, I have already managed to recognize the DAc but it reproduces in PCM not in DSD.
The sample rate as seen in the photo is STD S16_LE (44100/1)
What can I do to reproduce in DSD?
Thanks
[Image: 2019-07-20-13-17-58.jpg]
 Reply
#8
[Image: 2019-07-30-19-27-05.jpg]
 Reply
#9
Not sure why I missed this thread. As hkphantomgtr said, go to this thread, next scroll down and follow the steps in "What if your Native DAC Is Not In The List".

The specs listed is not immediately obvious if this DAC works with native DSD or not, but try native regardless (just make sure you keep the volume low during the test). And if all else fails, just fallback to DoP.
Snakeoil Operating System - Music, your way!
 Reply
#10
Hi, the DAC works perfect in DSD native in Foobar2000 whit the drivers ASIO.
It is possible to implement these drivers in Sankeoil?
 Reply
 
SnakeoilOS Mission
[-]

Our mission is to create a free to use computer OS that is easy to install, intuitive to operate and play music that will connect and engage with you emotionally.

SnakeoilOS gives you the freedom to spend more time on listening, enjoying and exploring music. Wasting time on computers is now a thing of the past! Everything is constantly evolving/improving. Please check back often for updates.

If you like this project, do show your support with a small token donation. All donations collected will be used to run this website, and for purchasing new equipment for the project.

Latest Threads
[-]
Advertising
[-]
Possibly Related Threads…
 

Users browsing this thread: 1 Guest(s)